Related Experiment Video
Updated: Jul 11, 2025

Two-way Valorization of Blast Furnace Slag: Synthesis of Precipitated Calcium Carbonate and Zeolitic Heavy Metal Adsorbent
Published on: February 21, 2017
Effects of EDTA on the leaching behaviors of Cs(I) and Co(II) from cement waste forms
Ja-Young Goo1, Seonggyu Choi2, Bong-Ju Kim2
1Korea Atomic Energy Research Institute, 989, Daedeok-daero, Yuseong-gu, Daejeon 34057, Republic of Korea; Department of Earth and Environmental Sciences, Korea University, 145 Anam-ro, Seongbuk-gu, Seoul 02841, Republic of Korea.
Abstract:
Cementation is extensively employed for immobilizing radionuclides in low- and intermediate-level radioactive wastes generated during the decommissioning of nuclear power plants. Ethylenediaminetetraacetic acid (EDTA), used as a decontamination agent during the decommissioning process, can be introduced into the cement waste form containing radionuclides. This study investigated the effects of the EDTA present in simulated radioactive decommissioning wastes on the leaching behaviors of Co and Cs immobilized in the cement waste form. Co leaching was facilitated by the formation of highly mobile Co-EDTA complexes. However, Cs leaching was impeded by the competition for leaching with other metal-EDTA complexes. Moreover, the EDTA-induced carbonated layer with a dense pore structure played a crucial role as a retardation barrier for the Cs leaching. The calcite contents of the samples with 8 wt% EDTA were approximately three times higher than those of the samples without EDTA. The introduced EDTA affected the leaching behaviors of both Co and Cs, as well as the microstructure evolution of the cement waste form. Nevertheless, the addition of EDTA had a relatively low positive effect on the efficiency of Cs immobilization, but also an obvious negative effect on the efficiency of Co immobilization, regardless of the concentration of EDTA. Finally, an EDTA dosage of 1 wt% in the cement waste forms containing Co or Cs is suggested as a potential waste acceptance criterion for solidified low- and intermediate-level radioactive waste.
More Related Videos
10:31Detection and Recovery of Palladium, Gold and Cobalt Metals from the Urban Mine Using Novel Sensors/Adsorbents Designated with Nanoscale Wagon-wheel-shaped Pores
Published on: December 6, 2015
06:27Expression of Cementitious Pore Solution and the Analysis of Its Chemical Composition and Resistivity Using X-ray Fluorescence
Published on: September 23, 2018
Related Concept Videos
EDTA: Auxiliary Complexing Reagents
Masking and Demasking Agents
There are many masking agents, such as cyanide, fluoride, triethanolamine, thiourea, and 2,3-bis(sulfanyl)propan-1-ol (formerly 2,3-dimercapto-1-propanol), with the masking agent chosen based on...
EDTA: Chemistry and Properties
Complexometric EDTA Titration Curves
EDTA: Direct, Back-, and Displacement Titration
Direct titration involves buffering the metal ion solution to the desired pH and directly titrating with standard EDTA until the endpoint. The optimum pH ensures a large conditional formation constant of metal−EDTA and visibility of the free indicator color in the solution. In addition, auxiliary complexing reagents are used to prevent the precipitation of metal hydroxides...
Effects of EDTA on End-Point Detection Methods
In the visual method, metal-ion indicators (metallochromic dyes), which have distinct colors in their free and complex forms, are added to the mixture to signal the titration's end point. They form stable complexes with metal ions, but these complexes are weaker than the corresponding metal–EDTA complexes. As a...