A comparative numerical evaluation of linear anode arrangements for enhancing above ground storage tank cathodic...

Cathodic protection as a complementary method is one of the most effective ways to prevent corrosion, along with coating and choosing the suitable material. There are different ways to protect the storage tank bottom. Due to the presence of the geo membrane layer and its effective and pivotal role, the use of mixed metal oxide (MMO) anodes is highly recommended. In the current study, the protection process of the above-ground storage tank bottom is simulated using MMO backfilled wire (concentric rings) and ribbon anodes (mesh grid system). In this regard, several parameters must be considered in reaching the protection criteria. The simulation results show that the effect of the limiting oxygen current density, soil resistivity and the anodic current have the greatest role. Anode depth and the spacing between the anodes are also critical factors if they have large values. Due to the importance of the number of conductor bars and feeding cables, two configurations have been presented for ribbon anodes. These configurations have a direct impact on grid resistance, rectifier size, and related costs. Finally, an economic comparison has been made regarding the use of sacrificial and MMO anodes in the form of ribbon next to wire anodes. The results show that, in the use of ribbon anodes, MMO anodes have better performance than magnesium and zinc sacrificial anodes, and the cost required for MMO linear anodes is far lower than the method of sacrificial ribbon anodes. In the present study, the cost of the MMO linear anode system is approximately 20% of zinc and magnesium sacrificial ribbon anode system cost.