Development of reduced volume endosseous cuspid tooth implant using topology optimization by SIMP technique for...

The article aims to design and develop a topology-optimized endosseous cuspid tooth implant of the maxilla region. The manuscript presents a numerical analysis of the resulting von Mises stresses and effective strain resulting in the topology-optimized implant with occlusal loading of 110 N. Solid Isotropic Material with Penalization (SIMP) method is employed for topology optimization and four different models, namely model-1, model-2, model-3, and model-4, are developed based on volume reduction rates of 8%, 16%, 24%, and 32%, respectively. FEA results highlight that the maximum stress and strain in the screw increases with volume reduction rates. The comparative analyses of the resulting stresses in the compact and cancellous bone along with the strain in the screw led to the conclusion that model-1, model-2, and model-3 resulted in moderate stresses on compact and cancellous bone compared to the original model of the implant. However, the screw and bones are subjected to maximum stress and strain in the model-4. The study concludes that model-2, with 16% reduced volume and 14.2% reduced mass as compared to the original implant, may be considered as the optimized design of the model. The resulting model offers a significant reduction in the weight and volume with a minor increase in effective stress and strain without negatively impacting the functionality and bio-mechanical performance of the implant. The optimized dental implant prototype is also fabricated as a proof of concept by the Fused Deposition Modelling process.