Related Experiment Video
Updated: Jul 11, 2025

Methane Hydrate Crystallization on Sessile Water Droplets
Published on: May 26, 2021
Rapid Growth of the CO2 Hydrate Induced by Mixing Trace Tetrafluoroethane
Tianyi Song1,2, Jinhai Zhang1, Wei Li2
1School of Energy and Power Engineering, Zhengzhou University of Light Industry, Zhengzhou 450002, China.
Abstract:
Rapid formation of the CO2 hydrate can be significantly induced by the gaseous thermodynamic promoter 1,1,1,2-tetrafluoroethane(R134a) due to the mild phase equilibrium conditions, although the formation mechanism and dynamic behavior are not clear. Therefore, a visual experimental system was developed to study the effects of different concentrations of R134a on the induction time, gas consumption, and growth morphology of the CO2 hydrate. At the same time, the combined effects under stirring and sodium dodecyl sulfate (SDS) systems were also studied. In addition, visualization and experimental model diagrams were combined to explain the fast formation mechanism of the R134a/CO2 hydrate. The results show that the CO2 hydrate average conversion rate was increased by more than 63% with the addition of mixed trace R134a(7%). A special phenomenon is found that two temperature peaks appear on the hydrate formation temperature curve, corresponding to two different stages of hydrate formation when stirring or SDS is added to the mixed gas reaction system. Furthermore, the gas consumption in stirring and SDS systems increases by 9 and 44%, respectively. Finally, it is also found that the R134a/CO2 mixed hydrate formed under the action of SDS has a "capillary" mechanism, which provides a gas-liquid phase exchange channel and a large number of nucleation sites for CO2 hydrate, thus promoting the formation of CO2 hydrate. This paper provides a novel, simple, and efficient method for CO2 hydrate gas storage technology.
Related Concept Videos
Turbulent Flow: Problem Solving
Temperature is a key factor in CO2 solubility. In this case, the CO2 gas and the liquid are cooled to 20°C. Lower temperatures...
Strength and Heat of Hydration
The heat of hydration for each cement compound is significant; for instance, tricalcium aluminate (C3A) and...
Carbonation Shrinkage
The concrete's permeability is slightly reduced as calcium carbonate produced during the reaction fills its pores. Furthermore, its strength is slightly enhanced as the water released during the reaction...
Aldehydes and Ketones with Water: Hydrate Formation
The formation of hydrates is a reversible reaction. Hydrate formation is influenced by steric and electronic factors accompanying the alkyl substituents on the carbonyl group: The rate of hydrate formation increases with a decrease in the number of alkyl groups attached to the carbonyl carbon. Hence,...
Hydration of Cement
Hybridization of Atomic Orbitals I

