Related Experiment Video
Updated: Jul 11, 2025

Uncoupling Coriolis Force and Rotating Buoyancy Effects on Full-Field Heat Transfer Properties of a Rotating Channel
Published on: October 5, 2018
Maisotsenko Cycle for Heat Recovery in Gas Turbines: A Fundamental Thermodynamic Assessment
Rasikh Tariq1, Hakan Caliskan2, Nadeem Ahmed Sheikh3
1Tecnologico de Monterrey, Institute for the Future of Education, Ave. Eugenio Garza Sada 2501 Monterrey N.L. 64849 Mexico.
Abstract:
This paper reports the Maisotsenko's cycle-based waste heat recovery system with enhanced humidification to exploit the maximum waste heat recovery potential of the gas turbine. This research uses an integrated methodology coupling thermodynamic balances with heat transfer model of air saturator. The performance of the system is deduced which are assisted with sensitivity analysis indicating the optimal mass flow rate ratio (0.7-0.8) and pressure ratio (4.5-5.0) between the topping and bottoming cycles, and the air saturator split (extraction) ratio (0.5). The net-work output, energy, and exergy efficiencies of the system are found to be ≈58.39 MW, ≈55.85%, and ≈52.79%, respectively. The maximum exergy destruction ratios are found as 68.2% for the combustion chamber, 16.0% for the topping turbine, 5.7% for topping compressor, 4.9% air saturator. The integration of Maisotsenko's cycle-based waste heat recovery system with a comprehensive thermodynamic model, as demonstrated in this research, offers valuable insights into enhancing the efficiency, cost-effectiveness, and environmental impact of gas turbines. By presenting fundamental equations related to thermodynamic balances, this work serves as an invaluable educational resource, equipping future researchers and students with the knowledge and skills needed to advance the study of thermodynamics and sustainable energy solutions.
Related Concept Videos
The Carnot Cycle
What could be the theoretical limit to the efficiency of a heat engine? The...
Efficiency of The Carnot Cycle
The Carnot Cycle and the Second Law of Thermodynamics
Since the individual steps in a Carnot cycle can be reversed, the entire cycle is, thus, reversible. If a Carnot cycle is reversed, it becomes a Carnot refrigerator. It extracts heat Qc from a cold reservoir at...
Otto and Diesel Cycle
Heat Engines
Whenever we consider heat engines (and associated devices such as refrigerators and heat pumps), we do not use the standard sign convention for heat and work. For convenience, we assume that the symbols Qh, Qc, and W represent only the amounts of heat transferred...
Refrigerators and Heat Pumps
A household refrigerator removes heat from...

