Related Experiment Video
Updated: Jul 11, 2025

Simulation, Fabrication and Characterization of THz Metamaterial Absorbers
Published on: December 27, 2012
Wideband 1-bit reconfigurable transmission metasurface unit cell design in Ka-band with polarization hold and
Tongxing Huang1, Wenjie Fu2, Dun Lu1
1Terahertz Science and Technology Key Laboratory of Sichuan Province, School of Electronic Science and Engineering, University of Electronic Science and Technology of China, Chengdu, 610054, China.
Abstract:
In this paper, a wideband transmission unit cell is proposed for programmable metasurfaces operating in the Ka-band. The unit cell features a compact period of only 2.91 mm, corresponding to 0.34 λ0 at the center frequency of 35 GHz. A receiving layer, consisting of a patch loaded with two PIN diodes, is utilized to achieve 1-bit phase modulation, while a U-shaped patch serves as the transmitting layer to enable selection of linear polarization hold or conversion. Based on the multi-resonance principle, the proposed unit cell exhibits broadband behavior, as demonstrated by simulation results under periodic boundary conditions, which indicate a 3 dB transmission bandwidth of 29.4-40 GHz (30.5%). Two unit cells were fabricated and tested in a standard waveguide, with the minimum insertion loss of the two states tested being 1.2 dB and 3 dB bandwidths of 30.1-31.2 GHz and 33.5-38.5 GHz, respectively. The maximum 180° phase error is 10°, indicating the high quality of the proposed unit cell.

