Related Experiment Video
Updated: Jul 11, 2025

Sampling, Sorting, and Characterizing Microplastics in Aquatic Environments with High Suspended Sediment Loads and Large Floating Debris
Published on: July 28, 2018
Retention of microplastics and tyre wear particles in stormwater ponds
Lasse Abraham Rasmussen1, Fan Liu1, Nanna Dyg Rathje Klemmensen1
1Aalborg University, Department of Built Environment, Thomas Manns Vej 23, 9220 Aalborg Øst, Denmark.
Abstract:
Stormwater runoff from urban areas contain a wide variety of pollutants which is typically managed using stormwater retention ponds. However, their performance with regards to emerging pollutants such as microplastics and tyre wear material remains unclear. In this study, samples of effluent water and sediments from four stormwater retention ponds were analysed for their content of microplastics and tyre wear material. Microplastics were analysed using state-of-the-art hyperspectral imaging technique while tyre wear material was analysed using pyrolysis-GC-MS. Microplastics were recovered in all samples and the mass balance revealed that on average 88% of small microplastics (<500 µm) were retain in the ponds while the removal efficiency for large microplastics (>500 µm) was 95%. Tyre wear material was identified in all sediment samples but found below the detection limit in three out of four effluent samples. On average 95% of the tyre wear material was removed by the retention ponds. The results from this study show that stormwater retention ponds are very effective in removing microplastics as well as tyre wear material from stormwater runoff.
Related Concept Videos
Conservation of Mass in Moving, Nondeforming Control Volume
In the context of a detention basin, the conservation of mass states that the total mass of water entering the basin must equal the mass leaving the basin plus any accumulation of...
Environmental Applications of Microorganisms
Bioremediation

