3D-printed MoS₂/Ni electrodes with excellent electro-catalytic performance and long-term stability for dechlorination...

Here, we report the production of 3D-printed MoS₂/Ni electrodes (3D-MoS₂/Ni) with long-term stability and excellent performance by the selective laser melting (SLM) technique. As a cathode, the obtained 3D-MoS₂/Ni could maintain a degradation rate above 94.0% for florfenicol (FLO) when repeatedly used 50 times in water. We also found that the removal rate of FLO by 3D-MoS₂/Ni was about 12 times higher than that of 3D-printed pure Ni (3D-Ni), attributed to the improved accessibility of H*. In addition, the electrochemical characterization results showed that the electrochemically active surface area of the 3D-MoS₂/Ni electrode is about 3-fold higher than that of the 3D-Ni electrode while the electrical resistance is 4 times lower. Based on tert-butanol suppression, electron paramagnetic resonance and triple quadrupole mass spectrometer experiments, a "dual path" mechanism and possible degradation pathway for the dechlorination of FLO by 3D-MoS₂/Ni were proposed. Furthermore, we also investigated the impacts of the cathode potential and the initial pH of the solution on the degradation of FLO. Overall, this study reveals that the SLM 3D printing technique is a promising approach for the rapid fabrication of high-stability metal electrodes, which could have broad application in the control of water contaminants in the environmental field.