Progress of improving waste activated sludge dewaterability: Influence factors, conditioning technologies and...

Large amounts of waste activated sludge (WAS) as a by-product generated from the biological treatment in wastewater treatment plants (WWTPs) is of high moisture content (MC), organic pollutants, heavy metals and pathogenic bacteria, it may cause serious environmental ecological risk without appropriate disposal. More than one half of the total operation cost is accounted for sludge disposal in a WWTP. Dewatering is an essential and important step during the sludge treatment and disposal process for it could efficiently reduce its volume, and be beneficial to the subsequent treatment and disposal of sludge. However, sludge should be conditioned before mechanical dewatering because of its high hydrophilicity. In this work, it presented a comprehensive review on sludge dewatering including summarizing the dewaterability measurement indexes, affecting factors, conditioning technologies, the improvement mechanisms. Finally, based on the eventual disposal and low carbon emission target, the implications and perspectives development of sludge conditioning were discussed. Based on the above discussion, there is no unified theoretical insight of the improvement mechanism of sludge dewaterability. In addition, the relationship between the microstructure of organic matters in sludge floc and the dewaterability should be deepened. Especially, how to choose the optimal conditioning technology for sludge dewatering lies in the physical and chemical properties of sludge, however, the carbon emission of the conditioning and dewatering process also needs to be considered. Accordingly, green, low-cost and organic conditioning agents are the direction of future research, and the establishment of automatic operating system and real-time evaluation index system is the key challenge.