Study on Dynamic Column Behavior and Complexation Mechanism of DBS-Modified Crown Ether-Based Silica to ⁹⁰Sr

A crown ether-loaded hybrid adsorbent suitable for the separation and enrichment of strontium from high-level liquid waste was synthesized. 4',4'(5″)-di(tert-butylcyclohexano)-18-crown-6 (DtBuCH18C6) and its modifiers dodecyl benzenesulfonic acid (DBS) and 1-dodecanol were impregnated into silica-based polymer support. The hybrid adsorbent exhibited excellent Sr(II) selectivity ability, and effective chromatographic separation and recovery of Sr(II) from simulated high-level liquid waste could be achieved with a (DtBuCH18C6 + DBS + dodec)/SiO₂-P packed column. The recovery rate of Sr(II) calculated based on the mass balance was approximately 99% and over 80% for the other coexisting metal ions. An appropriate increase in the concentration of Na-DTPA eluent was favorable to improve the efficiency of the elution process because of the increased complexation capacity of [DTPA]^5- to Sr(II). The developed theoretical model can simulate the dynamic breakthrough curves of the material on the basis of short column data, thereby predicting the scale-up column of the practical operation. Density functional theory calculation was used to explore the action mechanism of DBS modifiers on the Sr(II) complexation process of crown ether groups. Two Sr(II) complexation isomeric models of DtBuCH18C6 were established, and the calculation results revealed a similar complexation ability. DtBuCH18C6 could form a stable Sr(II) complexation structure with DBS coordination, which further indicated that DBS could be a ligand to promote the Sr(II) adsorption ability of crown ether materials.