Effect of Core Density on the Three-Point Bending Performance of Aluminum Foam Sandwich Panels

Using the powder-metallurgy rolling method, aluminum foam sandwich (AFS) panels with a metallurgical bond between the foam core and the panel can be produced. In this study, by manipulating the foaming temperature and duration, AFS panels were fabricated with varying core densities and thicknesses, all maintaining a panel thickness close to 1 mm. Through the three-point bending test, this research deeply delved into how core density influences the mechanical behaviors of these AFS panels. It became evident that a rise in core density positively affects the bending strength and failure load of the panels but inversely impacts their total energy absorption efficiency. Differing core densities brought about distinct failure patterns: low-density samples primarily showed panel indentation and core shear failures, whereas those of high density demonstrated panel yield and fractures. Furthermore, the research offers predictions on the initial failure loads for different failure modes and introduces a comprehensively designed failure diagram, laying a foundational theory for the production of AFS panels.