Environmental impact assessment of a novel third-generation biorefinery approach for astaxanthin and biofuel...

A novel third-generation biorefinery approach, including two paths of Ethanol/methane production pathway (EMP) and the direct methane production pathway (DMP), for astaxanthin and ethanol and biogas production from the freshwater microalgae Haematococcus pluvialis was developed previously. To ensure its environmental sustainability, a comprehensive life cycle assessment (LCA) study was conducted based on 1-GJ energy generation from biomethane as the functional unit. Results indicate that the EMP pathway had higher environmental impacts on all categories due to more stages and chemicals/energy consumption (at least five times greater effect). Results showed that while the enzymatic hydrolysis step followed by the fermentation stage was the main contributor to all environmental categories in the EMP route, astaxanthin induction dominated all environmental categories in the DMP route. The results showed that sodium nitrate, phosphate salts, inoculum sludge, acetone, and electricity had considerable environmental impacts. Moreover, despite low enzyme usage in enzymatic hydrolysis, these proteins significantly impacted all environmental categories in this stage. The baseline analysis concluded that to produce 1 GJ energy from methane, about 88 kg and 13 kg CO₂ were generated from the EMP and DMP pathways, respectively. A sensitivity analysis was also conducted to compare various ratios of chemicals, such as phosphate salts, with high contributions to enzymatic hydrolysis and astaxanthin induction stages in the EMP and DMP routes, respectively. Finally, the LCA results revealed that the DMP pathway is more environmentally friendly with the same economic value of biomethane and astaxanthin production. This LCA study updated the data related to the environmental assessment of processes to utilize H. pluvialis to produce biofuels and astaxanthin simultaneously.