Films properties of QPM corn starch with Delonix regia seed galactomannan as an edible coating material

Plant-based polysaccharides are considered a good alternative for obtaining edible films and coatings. In this research the objective was to determine the physicochemical characteristics of corn starch obtained from QPM Sac-Beh (SBCS) and Delonix regia galactomannan (DRG) and use them to produce films. Films were elaborated from 1 %(w/v) film-forming solutions (FFS) with SBCS:DRG 1:0, 1:1, and 0:1 ratio. Some films were prepared with glycerol 0.4 %(w/v) and vanillin 0.1 %(w/v). SBCS and DRG were characterized by infrared spectroscopy, X-ray diffraction, scanning electron microscopy and differential scanning calorimetry. SBCS presented low crystallinity which agrees with a low gelatinization ΔH observed. The SBCS:DRG 1:0 FFS without glycerol did not form films; however, DRG addition allows film formation. It was also found that glycerol addition reduced tensile strength to 10.3 MPa, from 41.3 MPa. The lowest water vapor permeability was found in films with 1:1 SBCS:DRG and 0.1 %(w/v) vanillin. This formulation was used to coat D'Anjou pears. This coating conserved the pears' color for 24 days while the control ones started to get a brown color on day 6. Based on the results obtained, FFS elaborated with 1:1 SBCS:DRG and 0.1 %(w/v) vanillin had potential use as edible film material for coating on climacteric fruits preservation.