Related Experiment Video
Updated: Jul 9, 2025

Fabrication and Design of Wood-Based High-Performance Composites
Published on: November 9, 2019
Enhanced Modification of Fast-Growing Wood: Application and Evaluation of Castor Oil-Based Unsaturated Polyester
Tianle Xu1, Xinran Ju2, Hui Tang1
1Faculty of Chemical Engineering, Kunming University of Science and Technology, Kunming 650093, China.
Abstract:
A type of multifunctional maleic acid ester monomer (COEGMA) was synthesized using castor oil as raw material, and green wood-plastic composites were prepared by chemically impregnating and curing the monomer into wood. The structure of the synthesized products at various stages was determined by FT-IR spectroscopy, 1H NMR, and GPC, and the curing experimental conditions were optimized. The results show that the water absorption of wood-plastic composites treated with COEGMA is reduced from the original 167.3% to less than 20%. The compressive strength has increased from 35.7 to 86.1 MPa, and the thermal stability has also increased by 40 °C. This research provides promising prospects for the development of environmentally friendly wood-plastic composites, especially as fossil resources become scarce and environmental pollution becomes more severe.
Related Concept Videos
Wood Products
Glue-laminated wood, often referred to as glulam, combines multiple smaller pieces of dimensional lumber using adhesives to form a single, larger piece. Cross-laminated timber consists...
Types of Step-Growth Polymers: Polyesters
Polyesters are commonly prepared from terephthalic acid and ethylene glycol; the crude product is known as poly(ethylene terephthalate) or PET. However, polyesters are synthesized industrially by transesterification of dimethyl terephthalate with ethylene glycol at 150 °C. The two reactants and the...
Wood Surfacing
The equipment used in the surfacing process is a plane equipped with rotating blades. This tool efficiently smoothens the wood surface and can...
Wood Panel Products
Introduction to Wood
The structural integrity of the...
Wood Fasteners
Nails are the most common fasteners, consisting of sharp-pointed metal pins that are driven into wood using a hammer or a mechanical nail gun. They come in a variety of diameters, heads, and lengths. Nailing techniques include...

