Tailored Time-Temperature Transformation Diagram for IN718 Alloy Obtained via Powder Bed Fusion Additive...

Experimental and computational approaches were used to study the microstructure of IN718 produced via powder bed fusion additive manufacturing (PBF-AM). The presence, chemical composition, and distribution of stable and metastable phases (γ'', δ, MC, and Laves) were also analyzed. The information obtained from the microstructural study was used to construct a tailored time-temperature transformation (TTT) diagram customized for additive manufacturing of IN718. Experimental techniques, including differential scanning calorimetry (DSC), scanning electron microscopy, energy dispersive X-ray spectroscopy, and electron backscatter diffraction (EBSD), were employed to establish the morphological, chemical, and structural characteristics of the microstructure. The Thermo-Calc software and a Scheil-Gulliver model were used to analyze the presence and behavior of phase transformations during heating and cooling processes under non-thermodynamic equilibrium conditions, typical of AM processes. Unlike conventional TTT diagrams of this alloy, the diagram presented here reveals that the precipitation of γ'' and δ phases occurs at lower temperatures and shorter times in AM-manufactured parts. Significantly, the superposition of γ'' and δ phase curves in the proposed diagram underscores the interdependence between these phases. This TTT diagram is a valuable insight that can help in the development of heat treatment processes and quality control for IN718 produced via PBF-AM.