An experimental study of the correlation between P-wave velocity and the physical properties of weakly cemented

Dong Lin1, Yuhuan Bu2, Huajie Liu1

  • 1China University of Petroleum (East China), Qingdao, People's Republic of China.

Scientific Reports
|December 11, 2023
PubMed

Related Concept Videos

Pore Size Distribution01:23

Pore Size Distribution

In concrete, the pore size distribution significantly influences the material's properties. Capillary pores, markedly larger than gel pores, form a vast network within partially hydrated cement paste, reducing the concrete's strength and increasing its permeability. This heightened permeability leads to a greater risk of damage from environmental factors like freeze-thaw cycles and chemical attacks, with the extent of vulnerability also being tied to the water-to-cement ratio.
Adequate...
136
Porosity in Cement Paste01:18

Porosity in Cement Paste

The porosity of concrete is a measure of the void spaces within its structure. These spaces impact its strength and durability significantly. When water and cement interact, a chemical reaction called hydration creates a semi-solid paste. This paste includes combined water, making up approximately 23% of the cement's dry mass, and gel water, which fills minuscule voids known as gel pores, accounting for about 28% of the cement gel volume.
The balance of water to cement in the mix is...
143
Permeability of Concrete01:25

Permeability of Concrete

Permeability in the context of concrete refers to how easily liquids or gases can pass through the material. This quality is crucial for assessing the water-tightness and durability of concrete structures and their resistance to chemical attacks. Concrete permeability can be determined through comparative laboratory tests. These tests typically involve sealing a concrete specimen from the sides, applying water pressure to the top surface with pressure, and measuring the amount of water passing...
146
Velocity Potential01:20

Velocity Potential

In steady, incompressible flow through a long, straight pipe with a uniform cross-section, the flow in the central region (far from the pipe walls) is irrotational. This irrotational nature means that fluid particles do not rotate around their axes, and a scalar function called the velocity potential, represented by ϕ, can be used to describe their movement. In irrotational flows, the velocity field V is defined as the gradient of the velocity potential:
370
Deriving the Speed of Sound in a Liquid01:09

Deriving the Speed of Sound in a Liquid

As with waves on a string, the speed of sound or a mechanical wave in a fluid depends on the fluid's elastic modulus and inertia. The two relevant physical quantities are the bulk modulus and the density of the material. Indeed, it turns out that the relationship between speed and the bulk modulus and density in fluids is the same as that between the speed and the Young's modulus and density in solids.
The speed of sound in fluids can be derived by considering a mechanical wave...
508
Velocity and Acceleration of a Wave00:51

Velocity and Acceleration of a Wave

A wave propagates through a medium with a constant speed, known as a wave velocity. It is different from the speed of the particles of the medium, which is not constant. In addition, the velocity of the medium is perpendicular to the velocity of the wave. The variable speed of the particles of the medium implies that there must be acceleration associated with it. 
The velocity of the particles can be obtained by taking the partial derivative of the position equation with respect to time....
4.0K