Coalescence-Induced Droplet Jumping on Superhydrophobic Surfaces with Annular Wedge-Shaped Micropillar Arrays

The coalescence-induced droplet jumping on superhydrophobic surfaces has extensive application potential in water harvesting, thermal management of electronic devices, and microfluidics. The rational design of the surface structure can influence the interaction between the droplet and the surface, thereby controlling the velocity and direction of the droplet's jumping. In this study, we fabricate the superhydrophobic surface with annular wedge-shaped micropillar arrays, examine the dynamic behavior of condensate droplets on the surface, and measure the temporal and spatial variations of droplet density, average radius, and surface coverage with wedge-shaped micropillars of varying sizes. In addition, the energy analysis of the coalescence-induced droplet jumping reveals that the two primary factors influencing the jumping are the relative size and position of the droplets and micropillars. Further numerical simulations find that the wedge-shaped micropillars cause an asymmetric distribution of pressure within the droplet and at the solid-liquid contact surface, which generates an unbalanced force driving the droplet in the gradient direction of the wedge-shaped micropillar, causing the droplet to jump off the surface with both vertical and gradient-direction velocities. The capacity of the wedge-shaped micropillar surface to transport droplets in the gradient direction increases and then decreases as the relative size of the droplets and micropillars increases. The relative position of the droplet center-of-mass line perpendicular to the bottom edge of the wedge micropillars' trapezoidal shape is more favorable for droplet transport. This work reveals the influence mechanism of surface structure on the velocity and direction of droplet jumping, and the results can guide the microstructure design of superhydrophobic surfaces, which has significant implications for the application of droplet jumping.