Related Experiment Video
Updated: Jul 8, 2025

Writing Bragg Gratings in Multicore Fibers
Published on: April 20, 2016
Demonstration of an 800G CDM-SDM coherent PON utilizing weakly coupled multicore fibers with CDM tributary
Abstract:
In this Letter, we present an experimental demonstration of downstream signaling in a 16 × 50 Gbit/s coherent passive optical network (CPON) using the code and space division multiplexing (CDM-SDM) approach. We realize optical SDM through the utilization of a 4-core weakly coupled multicore fiber (WC-MCF), enhancing the total available optical launch power at the optical line terminal (OLT). This enhancement significantly improves the power budget for CPONs that connect with a large number of optical network units (ONUs). At the second stage of the CPON, four CDM-assigned ONUs are connected to individual cores of the WC-MCF, thereby supporting the connectivity of up to 16 ONUs. Through experiments, we have noted substantial disparities in the downstream signaling performance among individual CDM-assigned ONUs, particularly as the capacity is increased to 800 Gbit/s. To address this issue, we have employed an innovative approach by leveraging space-time coding techniques to manipulate the CDM tributaries, to achieve a balanced reception performance for all ONUs within the CPON. We believe that the proposed CDM-SDM CPON scheme, complemented by the advanced DSP flow chart, holds significant promise for future PON systems characterized by substantial capacity and extensive connectivity.
Related Concept Videos
Energy Stored In A Coaxial Cable
In the simplest form, a coaxial cable can be represented by two long hollow concentric cylinders in which the current flows in opposite directions. The magnetic field inside and outside the coaxial cable is determined by using Ampère's law. The magnetic...
Cable Subjected to a Distributed Load
Cable Subjected to Concentrated Loads
Maximum Power Transfer
By substituting the entire circuit with...
Beams with Symmetric Loadings
The M/EI...
Distributed Loads
For example, consider a bookshelf filled with books stacked vertically adjacent to each other. The weight of the books is evenly distributed over the length of the shelf. As a result, the pressure at different locations on the surface of the...

