Flow-through electrochemically assisted reverse-osmosis: A new process towards low-chemical desalination

Two-pass reverse osmosis (RO) process is prevailing in seawater desalination, but each process must consume considerable amounts of chemicals to secure product water quality. Caustic soda is used to raise the pH of the first-pass RO permeate (also the second-pass RO feed) to ensure adequate removal of boron in the subsequent second-pass RO, while antiscalants and disinfectants such as hypochlorite are added in the feed seawater for scaling and biofouling control of the first-pass RO membranes. Here, we report for the first time a flow-through electrochemically assisted reverse osmosis (FT-EARO) module system used in the first-pass RO, aiming to dramatically reduce or even eliminate chemical usage for the current RO desalination. This novel system integrated an electroconductive permeate carrier as cathode and an electroconductive feed spacer as anode on each side of the first-pass RO membrane. Upon applying an extremely low-energy (< 0.005 kWh/m³) electrical field, the FT-EARO module could (1) produce a permeate with pH >10 with no alkali dosage, ensuring sufficient boron removal in the second-pass RO, and (2) generate protons and low-concentration free chlorine near the membrane surface, potentially discouraging membrane scaling and biofouling while maintaining satisfactory desalination performance. The current study further elucidated the high scalability of this novel electrified high-pressure RO module design. The low-chemical manner of FT-EARO presents an attractive practical option towards green and sustainable seawater desalination.