Separation of Lithium from Aluminum-Containing Clay Mineral Leachate Solution Using Energy-Efficient Membrane Solvent...

This study investigated a novel membrane solvent extraction (MSX) process for the recovery and separation of lithium (Li) from clay minerals using a cation exchange organic extractant [di-(2-ethylhexyl)phosphoric acid] (DEHPA). The Li is selectively extracted from clay mineral leachate solution using highly efficient aluminum hydroxide sorbents to form lithium aluminum double hydroxide sulfate (LDH sulfate) as the precipitate. Several delithiation methods have been explored to separate Li from aluminum (Al). LDH sulfate is dissolved in dilute H₂SO₄ and used as the feed solution, and DEHPA is used to selectively separate Li and Al from the feed solution. The MSX process immobilizes DEHPA in the microporous membrane pores and continuously removes Al from the feed solution to obtain pure Li. The efficiency of DEHPA for the selective separation of Li from Al is determined by measuring its distribution coefficient. This study used the optimum feed solution pH of 3, strip solution concentration of 2 mol/L H₂SO₄, and an organic phase composition of 30% v/v DEHPA in Isopar-L. The MSX process achieved a Li yield of about 92% and a purity of ⩾ 94%. The results suggest that the innovative MSX technology is a time- and energy-efficient approach for the recovery and separation of high-purity Li for application in Li-ion batteries and other clean energy technologies.