Quantitative analysis and evaluation of solid-state stability of mebendazole Forms A and C suspensions by powder...

Mebendazole (MBZ) is a broad-spectrum active pharmaceutical ingredient (API) indicated for treating parasitosis, and it has three solid-state forms, A, B, and C. These solid forms exhibit significant differences in dissolution properties, which cause considerable changes in the therapeutic effect. When at least 30 % of Form A is present in the formulation, it has a similar effect to the placebo. The aim of this study was to develop a reliable quantitative method for MBZ (Forms A and C) suspensions that allowed to study the solid-state stability and the kinetics of the solid-state transformation of MBZ suspensions under the recommended pharmaceutical industry conditions. One method was developed to carry out the drying process and the other one to quantify Forms A and C of MBZ suspensions; both were evaluated. For the stability study, samples were prepared with different starting reference concentrations of Form A and stored from 1 to 24 months under long-term stability conditions (30 ± 2 °C and 75 ± 5 % RH) and from 1 to 6 months under accelerated stability conditions (40 ± 2 °C and 75 ± 5 % RH). Data collection was performed by powder X-ray diffraction (PXRD). The Rietveld method (RM) and Topas's program were used to solid form quantification. Avrami's equation was used to determine the kinetic parameters. The results showed that the combination of the drying process and solid form quantification developed method for suspension was a very accurate methodology for solid-state stability studies. Furthermore, in long-term and accelerated solid-state conditions, suspension with an initial value of 1 % of Form A were sufficient to cause a solid-state transformation (Form C to A) greater than 30 % in the first and second months, with a complete transformation in nine and six months respectively. These results demonstrate that suspensions show complete solid-state transformation (Form C to A) in a shorter time than the product's shelf life (∼2 years). In this work, a reliable methodology was developed to quantify MBZ (Forms A and C) suspensions. This methodology could be used to control the different solid forms for MBZ and other APIs to avoid solid-state transformation problems.