Petroleum wastewater: Environmental protection, treatment, and safe reuse: An overview

Oil petroleum production consumes about 1.0-7.2 bbl. The needed water for such production ranges between 0.47 and 7.2 L water to 1.0 L crude. Between 80 and 90% of the consumed water is disposed of as wasted effluents. Consequently, there is an important connection between petroleum production and the contamination of the environment and surface water in addition to their ecotoxicological effects. The objective of the present review is to through light on the hazardous impact of petroleum wastewater on the environment and water ways. The present study presents several wastewater treatment technologies in handling the petroleum produced water (PPW) and reducing the hazardous impact to the environment. Safe reuse is also presented including simple, advanced, and environmentally friendly techniques. The reported treatment technologies are divided into five main categories: membrane technologies, biological treatment processes, electro-chemical coagulation, physical/chemical treatment processes (dissolved air flotation (DAF)/air flotation (IAF), adsorption, and chemical flocculation), and catalytic oxidation including chemicals such as advanced and Fenton oxidation processes (AOPs). The analysis and observation of each treatment process are also presented. Implementing of these processes in sequential and/or in combined to avoid the drawbacks of any poor treatment are discussed. The present review discusses; also, in detail each of these treatment technologies and their efficiency including the observation and conclusions of each one. The study shows; also; how the final treated effluent can be reused for non-potable purposes as an additional water resource according to the degree of decontamination. An additional advantage of treatment is protection of both the environment and the water ways by avoiding any discharge of such hazardous wastewater.