Numerical simulation of strength and failure analysis of heterogeneous sandstone under different loading rates

Natural rock masses often contain heterogeneous structures with varying sizes, non-uniform distributions, and strengths, which influence the mechanical response characteristics and crack propagation modes under loading. Furthermore, heterogeneous structures can affect the stability of the rock mass, in serious cases, leading to geotechnical and mining engineering disasters. In the present work, a parallel-bond model (PBM)-based numerical simulation using Particle Flow Code (PFC) was carried out to study the strength and failure characteristics of sandstone specimens with heterogeneous structures under different loading rates. The results show that the peak strength increases with the increasing loading rate. In addition, all of the initial cracks occurred at the edges of the heterogeneous structures of specimens under different loading rates. The greater the loading rate, the greater the stress concentration degree at the edge of the heterogeneous structures, the greater the dissipated energy as the sandstone specimens with heterogeneous structures suffer damage, the more intense the acoustic emission activity, and the greater the damage degree of the specimens. The number of cracks generated in sandstone specimens with heterogeneous structures increases gradually with the increasing loading rate during the initial loading stage, and gradually decreases after the specimens are damaged. Cracks propagate and develop from the upper right region to the lower right region of the specimens, forming crack groups that rapidly penetrate the specimens, leading to failure. Under different loading rates, the final failure behavior of the sandstone specimens with heterogeneous structures changes from an inverted V-type to θ-type, then gradually evolves to O-type failure.