Design, Fabrication, and Preliminary Validation of Patient-Specific Spine Section Phantoms for Use in Training Spine...

Pedicle screw fixation (PSF) demands rigorous training to mitigate the risk of severe neurovascular complications arising from screw misplacement. This paper introduces a patient-specific phantom designed for PSF training, extending a portion of the learning process beyond the confines of the surgical room. Six phantoms of the thoracolumbar region were fabricated from radiological datasets, combining 3D printing and casting techniques. The phantoms were employed in three training sessions by a fifth-year resident who performed full training on all six phantoms; he/she placed a total of 57 pedicle screws. Analysis of the learning curve, focusing on time per screw and positioning accuracy, revealed attainment of an asymptotic performance level (around 3 min per screw) after 40 screws. The phantom's efficacy was evaluated by three experts and six residents, each inserting a minimum of four screws. Initial assessments confirmed face, content, and construct validity, affirming the patient-specific phantoms as a valuable training resource. These proposed phantoms exhibit great promise as an essential tool in surgical training as they exhibited a demonstrable learning effect on the PSF technique. This study lays the foundation for further exploration and underscores the potential impact of these patient-specific phantoms on the future of spinal surgical education.