Related Experiment Video
Updated: Jul 7, 2025

A Uniaxial Compression Experiment with CO2-Bearing Coal Using a Visualized and Constant-Volume Gas-Solid Coupling Test System
Published on: June 12, 2019
Detection of Spontaneous Combustion Areas of Coal Gangue Dumps and Comprehensive Governance Technologies: A Case
Yang Liu1,2, Xuyao Qi1, Dayong Luo2
1School of Safety Engineering, China University of Mining and Technology, Xuzhou 221116, China.
Abstract:
Spontaneous combustion of coal gangue dumps not only releases toxic and harmful gases, polluting the environment, but also leads to explosion accidents and casualties due to improper handling. This paper focuses on delineating the fire area, constructing a comprehensive fire prevention and extinguishing system, and restoring the ecological environment. Infrared thermal imaging was used to detect the shallow fire area, while intensive drilling was conducted to detect the deep fire area. The stability of the coal gangue dump was enhanced by perfusing three-phase foam for cooling and using a curing material to fill the cracks. Land reclamation was then performed to restore the ecological environment. The results indicate that spontaneous combustion of coal gangue dumps can trigger the spread of the fire area from the outside to the inside, gradually expanding due to the 'stack effect'. The sources of spontaneous combustion in gangue fire areas are mainly located 3-5 m below the flat surface, and the shallow and deep fire areas are interconnected, posing a significant danger. These research findings can serve as a reference for detecting fire areas in coal gangue dumps and controlling environmental pollution.
More Related Videos
Related Concept Videos
Gas Chromatography: Types of Detectors-II
Constant Volume Calorimetry
Gas Chromatography: Types of Detectors-I
TCD is the earliest and most widely used detector that operates by measuring the changes in the thermal conductivity of the carrier gas. When a sample compound enters the detector,...
Gas Chromatography: Overview of Detectors
A non-destructive detector allows a sample to be analyzed without altering or consuming it, meaning the sample can be collected after detection for further analysis. Examples include thermal conductivity detectors and...
Flame Photometry: Overview

