Related Experiment Video
Updated: Jul 7, 2025

In Situ Transmission Electron Microscopy with Biasing and Fabrication of Asymmetric Crossbars Based on Mixed-Phased a-VOx
Published on: May 13, 2020
Correlation between oxygen flow-controlled resistive switching and capacitance behavior in gallium oxide memristors
Hye Jin Lee1, Jeong-Hyeon Kim1, Jongyun Choi1
1Department of IT & Semiconductor Convergence Engineering, Tech University of Korea, Siheung, 15073, Republic of Korea.
Abstract:
We studied on the bipolar resistive switching (RS)-dependent capacitance of Ga2O3 memristors, grown using controlled oxygen flow via a radio frequency sputtering process. The Ag/Ga2O3/Pt memristor structure was employed to investigate the capacitance changes associated with RS behavior and oxygen concentration. In the low-resistance state (LRS), capacitance increased by over 60 times compared to the high-resistance state (HRS). Furthermore, in the HRS state, increasing the oxygen flow from 0 to 0.3 sccm resulted in an 80 % decrease in capacitance, while in the LRS state, capacitance increased by 128 %. These results indicate that RS-dependent capacitance in Ga2O3 memristors is influenced by the density of oxygen vacancies. The presence of oxygen vacancies affects charge storage capacity and capacitance, with higher oxygen concentrations leading to reduced capacitance in HRS and increased capacitance in LRS. The results contribute to the understanding of the capacitance behavior in Ga2O3 memristors and highlight the significance of oxygen vacancies in their operation.
Related Concept Videos
MOS Capacitor
The metal gate is typically made from highly conductive materials such as aluminum or polysilicon. Beneath the metal gate lies a thin layer of...
Characteristics of MOSFET
Various vital parameters influence their functionality, which is crucial for theory and electronics applications. First, channel dimensions, precisely length, and width, are pivotal. The size of these channels affects the transistor's ability to carry current and switching speeds; shorter channels typically enable...
MOSFET: Enhancement Mode
In their basic form, enhancement-mode MOSFETs are typically non-conductive when the gate-source voltage (Vgs) is zero. This default 'off' state means no...
MOSFET
In an n-MOSFET, the structure includes n-type source and drain...
Biasing of Metal-Semiconductor Junctions
In Schottky junctions, where the semiconductor is n-type, applying a positive voltage to the metal relative to the semiconductor reduces its Fermi...
Equivalent Capacitance
The following strategies are adopted to calculate...

