Design and Validation of a Three-Dimensional Printer-Based System Enabling Rapid, Low-Cost Construction of the...

The COVID-19 pandemic proved the great usefulness of lateral flow tests as self- and rapid tests. The rapid expansion of this field requires the design and validation of novel, affordable, and versatile technologies for the easy fabrication of a variety of lateral flow devices. In the present work, we have developed a new, simple, and cost-effective system for the dispensing of reagents on the membranes of lateral flow devices to be used for research purposes. The 3D printing technology is integrated, for the first time, with simple and inexpensive tools such as a technical pen and disposable pipet tips for the construction of the test and the control areas of the devices. We also used this system for the automated fabrication of spots on the membrane for multiplex analysis. The devices were applied for the detection of proteins/antibodies and single- and double-stranded DNA targets. Also, devices with multiple biosensing areas on the membrane were constructed for the simultaneous detection of different analytes. The proposed system is very simple, automated, and inexpensive and has provided rapid and reproducible construction of lateral flow devices. Compared to a commercially available automated dispenser, the devices showed similar detection capabilities and reproducibility in various real samples. Moreover, contrary to the existing dispensers, the proposed system does not require any gas or costly precision pumps and syringes for the deposition. In conclusion, the developed 3D printer-based system could be an extremely useful alternative for research laboratories for the construction of lateral flow devices of various assay configurations.