Simultaneous Optical and Mechanical Sensing Based on Optomechanical Resonators

Optical and mechanical resonators have each been abundantly employed in sensing applications, albeit following separate development. Here we show that bringing together optical and mechanical resonances in a unique sensing device significantly improves the sensor performance. To that purpose, we employ nanoscale optomechanical disk resonators that simultaneously support high quality optical and mechanical modes localized in tiny volumes, which provide extraordinary sensitivities. We perform environmental sensing, but the conclusions of our work extend to other sensing applications. First, we determine optical and mechanical responsivities to temperature and relative humidity changes. Second, by characterizing mechanical and optical frequency stabilities, we determine the corresponding limits of detection. Mechanical modes appear more sensitive to relative humidity changes, while optical modes appear more sensitive to temperature ones, reaching, respectively, 0.05% and 0.6 mK of independent resolution. We then prove that simultaneous optical and mechanical monitoring enables disentangling both effects and demonstrates 0.1% and 1 mK resolution, even considering that both parameters may change at the same time. Finally, we highlight the importance of actively tracking the optical mode when optomechanical sensor devices. Not doing so enforces tedious independent calibration, influences the device sensitivity during the experiment, and shortens the sensing range. The present work hence clarifies the requirements for the optimal operation of optomechanical sensors, which will be of importance for chemical and biological sensing.