Synthesis and Optimization of Glycerol Carbonate from Crude Glycerol Using Sodium Carbonate (Na₂CO₃) as a...

The essential need for sustainable energy sources to replace fossil fuels has fueled interest in renewable energy and biorefinery processes. Biodiesel production generates a considerable amount of crude glycerol (CG), which poses a challenge for the industry. This study aims to address this challenge by purifying CG through acidification. The acidification process successfully purified crude glycerol (PCG), resulting in a purity of 98.4 wt %. Subsequently, synthesizing glycerol carbonate (GC) from PCG and dimethyl carbonate (DMC) was undertaken by using heterogeneous catalysts. Sodium carbonate (Na₂CO₃) emerges as the most promising catalyst, considering its suitability in the presence of impurities such as 0.72 wt % of water and 0.57 wt % of matter organic nonglycerol (MONG) in PCG. The optimum catalyst dosage of Na₂CO₃ was determined as 2.1% mol of PCG. The experiments were carried out using a central composite design (CCD) methodology. By employing the response surface method (RSM), the optimal reaction conditions were determined to be a PCG/DMC molar ratio of 1:2.37 and a reaction time of 1.83 h. Under these conditions, an observed GC yield of 72.13% and PCG conversion of 78.39% were achieved. Despite the purification process, PCG still contains residual water, making Na₂CO₃ a suitable catalyst capable of tolerating a water content up to 3 wt %. This study not only enhances the effective utilization of CG within the biodiesel industry but also offers valuable insights for further exploration of sustainable chemical processes in future research.