Bo-derived waste neem to enriching reinforced hybrid composite for environmental remediation

The utilization of natural fibres often entails a lesser environmental impact when compared to synthetic fibres. Biodegradable natural fibres minimize waste and pollution, and promote sustainability, but their weaker bonds limit their resilience. These issues can be addressed by customizing the composite's mechanical properties with natural and synthetic fibres. In this study, hybrid composites were created using the hand layup method with a novel dissimilar layer arrangement of neem (N), sisal (S), and glass (G) fibre and analyze its mechanical and thermal properties. Experimental observation shows that the GN composite had a higher maximum ultimate tensile strength of 26 N/mm² than the GS, GNS, and GSN composites. The GN composite had a percentage elongation of 6.33%, similar to the percentage elongation of the GS composite (6.833%), and it also had a higher ultimate shear strength of 50 MPa. The composite GS absorbed 6.6 J energy, higher than the composites GN, GNS, and GNS, which absorbed 6.1 J, 4.5 J, and 4.5 J, respectively. The fractured surface's SEM images were obtained and analyzed for failure. The results demonstrated that the hybridization was effective, and better properties can be obtained by combining neem, sisal, and glass fiber, and it can be used for other requirements, including strength, weight, cost, and ecological impact.