Evaluation of rock and fluid intermolecular interaction between asphaltene and sand minerals using electrochemical,...

Long-time contact of heavy crude oil with rock leads to an adsorption phenomenon, which causes the rock surface to become oil-wet and appears as a barrier to the fluid flow in the porous media. However precise understanding of how asphaltene fractions influence sand wettability is lacking. The wetness of neat and asphaltene-aged sandstone was calculated using two relative permeability and contact angle methods. Then the molecular interaction between asphaltene and sand minerals was systematically analyzed using Fourier-transform infrared spectroscopy. Furthermore, the zeta potential was representative of electrostatic properties and surface charge alteration of the sand after these phenomena. Scanning electron microscopy with energy-dispersive X-ray (EDX) analysis also showed elemental mapping and dispersion of asphaltene particles on the rock surface. According to contact angle and EDX analyses of asphaltene samples, the contact angle rises from 115° to 141° by an increase in carbon adsorption on the sand surface from 8.23 to 41.56%. Spectroscopy results demonstrated that hydrogen-bonding, π-bonding, and sulfur-containing compounds such as sulfoxide improve asphaltene adsorption onto the sand surface. The higher the aromaticity index and hydrogen potential index of asphaltene, the greater the ability of asphaltene to change wettability. Adsorption of surface active components would make the surface charge of the sand more negative. The presence of nitrogen/sulfur-containing functional groups on the sand surface changed the electrostatic properties, as a sand surface coated with asphaltene would reduce the percentage of metal cations.