Construct Amorphous Polymer Interface to Enhance the Thermoelectric Performance of Commercial Bi_0.5Sb_1.5Te₃ Materials

Interfaces, such as grain boundaries and phase boundaries in thermoelectric (TE) materials, play a crucial role in the carrier/phonon transport. Accurate control of the features of interfaces, including composition, crystalline nature, and thickness may give rise to a promising pathway to break the trade-off between phonon and carrier transport properties, which is essential to design high-performance TE materials. In this work, the amorphous polymer interface (API) layer is introduced to the p-type commercial Bi_0.5Sb_1.5Te₃ (BST) TE material by the liquid-phase sintering process. Due to the larger mismatch in the acoustic impedance or phonon spectra between the amorphous polymer layer and the BST phase, the additional interfacial thermal resistance is introduced, which results in a large decrease in lattice thermal conductivity. It is found that the interfacial thermal resistance at the API is much higher than that of normal grain boundary and hetero interface reported in the literature. Conversely, taking advantage of the strong electron and phonon scattering, a large net get of ZT was achieved. A maximum ZT of ∼1.22 at 350 K was obtained in the BST/polyimide-0.5% sample, which is considerably greater than that of the commercial BST matrix (∼0.99 at 350 K). Furthermore, the optimized BST/polymer sample also exhibited almost 20% enhancement in hardness compared with the pure BST sample. This work has opened a new window for designing high-performance TE composites, which may extend to other material systems.