Related Experiment Video
Updated: Jul 6, 2025

A Protocol for Detecting and Scavenging Gas-phase Free Radicals in Mainstream Cigarette Smoke
Published on: January 2, 2012
Quality variations of leachate resulting from cigarette filter recycling as a challenge for its management
Amin Hossaini Motlagh1, Navid Alinejad2, Farogh Kazembeigi3,4
1Department of Environmental Health Engineering, Faculty of Health, Yasuj University of Medical Sciences, Yasuj, Iran.
Abstract:
Recycling is known as a solution for cigarette filter management, but this may cause the release of trapped pollutants in it. Cigarette smoke toxins and chemicals that trapped in the cigarette filter can accumulate in the recycling leachate. In this study, littered cigarette filters and freshly smoked cigarette filters were recycled and the resulting leachate was analyzed. The results showed that the minimum and maximum Chemical Oxygen Demand (COD) of the studied leachates were 2100 mg/L and 11,300 mg/L, respectively. The maximum temporal variation in the studied leachate quality was 74.28%, but the maximum spatial variation was 314.2%. COD in the freshly smoked sample was 2600-9200 mg/L more than the littered samples. The average concentration of chromium, lead, nickel, and cadmium in littered samples was 0.023, 0.024, 0.045, and 0.019 mg/L, respectively. Environmental conditions such as humidity, the efficiency of the urban cleaning system in reducing the resistance of littered filters, the difference in the quality of the filter and tobacco, and the difference in smoking behaviors were effective in this variation. Reducing the toxicity of cigarette smoke and improving the efficiency of the urban cleaning system can lead to the same quality, but leachate treatment is necessary to reduce the environmental risk.
More Related Videos
09:30A Microcontroller Operated Device for the Generation of Liquid Extracts from Conventional Cigarette Smoke and Electronic Cigarette Aerosol
Published on: January 18, 2018
12:11A Modified EPA Method 1623 that Uses Tangential Flow Hollow-fiber Ultrafiltration and Heat Dissociation Steps to Detect Waterborne Cryptosporidium and Giardia spp.
Published on: July 9, 2012
Related Concept Videos
Filtration
Sampling Methods: Sample Types
Solid samples include a variety of substances, such as sediments from water bodies, soil, metals, and biological tissues. Two standard methods for extracting sediments from water bodies are grab sampling and piston coring. Grab sampling involves using a device to collect a discrete sediment sample from the bottom of a water body with minimal disturbance. Grab samples do not always represent the entire area due to...