Related Experiment Video
Updated: Jul 5, 2025

Predicting Catalyst Extrudate Breakage Based on the Modulus of Rupture
Published on: May 13, 2018
Research on the Early-Age Cracking of Concrete Added with Magnesium Oxide under a Temperature Stress Test Machine
Zixuan Li1, Zheng Chen1, Junting Li1
1College of Civil and Transportation Engineering, Shenzhen University, Shenzhen 518060, China.
Abstract:
Concrete cracking is a significant issue in the global construction industry, and the restraint stress of concrete is a crucial contributing factor to early concrete cracking. The addition of magnesium oxide additive (MEA) to concrete is a method to enhance its crack resistance. In this paper, concrete specimens with four different contents of MEA were tested with a temperature stress testing machine. The deformation characteristics and mechanical properties of concrete with varying contents of MEA were investigated using both free deformation tests and fully constrained deformation tests. The prediction model for the early restrained stress of concrete was developed by integrating the stress relaxation phenomenon of concrete with models for autogenous shrinkage, temperature deformation, and elastic modulus. According to the results, (1) the thermal expansion coefficient exhibits a pattern of initially increasing and subsequently decreasing with the increasing ratio of MEA; (2) the addition of 3% and 8% MEA can offset 23% and 35.1% of the concrete's self-shrinkage, respectively. Nevertheless, when the added MEA content is 5%, the self-shrinkage of concrete increases by 6%; (3) the addition of 3-8% MEA can result in a 0.5-1.67 times increase in the maximum expansion stress of concrete, as well as a 0.5-0.95 times increase in cracking stress; (4) as the MEA content continues to increase, the stress relaxation level of concrete also increases. In comparison to concrete mixed without MEA, the maximum increase in the stress relaxation level of concrete is 65.5%, thereby enhancing the concrete's anti-cracking ability. However, when the MEA dosage reaches a certain threshold, the stress relaxation enhancement brought about by the addition of MEA will no longer be significant; (5) when compared to the experimental data, the established model of early-age constraint stress accurately predicts the tensile constraint stress of concrete.
More Related Videos
10:52Conducting Elevated Temperature Normal and Combined Pressure-Shear Plate Impact Experiments Via a Breech-end Sabot Heater System
Published on: August 7, 2018
07:37Full-field Strain Measurements for Microstructurally Small Fatigue Crack Propagation Using Digital Image Correlation Method
Published on: January 16, 2019
Related Concept Videos
Microcracking in Concrete
Corrosion of Reinforcement
However, over time and under certain conditions like carbonation, chloride ingress, and cracking this protective state can be compromised. Steel has areas with...
Types of Non-structural Cracks in Concrete
Plastic shrinkage cracks typically form within hours after the concrete is poured. The concrete's surface dries faster than the bottom, creating tensile stress that the still-plastic concrete cannot withstand, leading to diagonal or randomly patterned cracks on the concrete surface.
Mass Concreting
To reduce the risk of such cracking, the concrete mix may incorporate low-heat cement and pozzolans to reduce the temperature rise. Pre-cooled angular aggregates and water-reducing admixtures...
Sulfate Attack on Concrete
Sulfates from sources like soil, groundwater, or industrial effluents...
Frost Action on Concrete
This freeze-thaw cycle primarily causes surface scaling, where...