The dependence in microcystin removal with powdered activated carbon on variant properties, carbon properties, and...

Powdered activated carbon (PAC) is commonly used by water treatment plants to remove harmful cyanotoxins such as microcystins (MCs) produced during seasonal harmful algal blooms. MC removal by PAC depends upon the properties of the PAC, the properties of the MC variant, and the presence and properties of dissolved organic matter (DOM). To identify which of these factors has the greatest impact on the removal of MC by PAC, we evaluated the removal of four different MC variants (MC-LR, MC-LA, MC-RR and desmethylated MC-RR) by three different PAC types (wood-based, coal-blend and coal-based). The role of DOM properties was evaluated using DOM isolated from two different sources, a terrestrial source (Suwannee River Fulvic Acid, SRFA) and a microbial source (Grand Lake St Marys DOM, GLSM). The results of adsorption experiments conducted over a period of 72 h demonstrated the wood-based PAC, which had the highest surface area and mesopore volume of the PAC tested, had the highest adsorption rate and capacity for all four MC variants. Of the variants studied, neutrally charged MC-RR was adsorbed more rapidly and to a greater extent on all of the PAC types than were the other variants. Although MC-LA and MC-LR had the greatest hydrophobicity, their negative charges resulted in their being adsorbed the least. As expected, DOM inhibited microcystin adsorption to PAC. The degree of inhibition, however, did not significantly vary for the two DOM types evaluated, indicating the properties of the DOM on MC adsorption to PAC was less important than the PAC properties or MC variant properties. Overall, PAC properties were a more important factor in MC removal than were the MC properties or DOM conditions.