Related Experiment Video
Updated: Jul 5, 2025

Experimental Investigation of the Hierarchical Control in DC Microgrids Using a Real-time Simulator
Published on: February 14, 2025
Multi-objective cooperative controller design for rapid state-of-charge balancing and flexible bus voltage regulation
Yancheng Liu1, Yuji Zeng1, Qinjin Zhang1
1Marine Engineering College, Dalian Maritime University, Dalian 116026, People's Republic of China.
Abstract:
In this paper, a multi-objective cooperative (MOC) controller based on average consensus algorithm is designed to achieve rapid State-of-Charge (SoC) balancing, proportional load current sharing, and flexible DC bus voltage regulation for parallel battery storage units (BSUs) in shipboard DC microgrids. Different from the conventional secondary controllers, the designed MOC controller can simultaneously achieve the above three control objectives with a fully distributed manner without requiring multiple controllers, thereby effectively improving the system stability and reducing the communication burden. Furthermore, an optimized convergence factor is designed to accelerate SoC balancing, and pinning control is introduced to obtain flexible and accurate DC bus voltage regulation. The process of SoC balancing and current sharing analysis, SoC convergence performance analysis, large-signal stability analysis, and global steady-state analysis verifies the rationality and stability of the MOC controller. Finally, the Matlab/Simulink simulation and StarSim HIL experimental results demonstrate the effectiveness and robustness of the designed MOC controller in a shipboard DC microgrid under various testing scenarios.
More Related Videos
11:53The Modular Design and Production of an Intelligent Robot Based on a Closed-Loop Control Strategy
Published on: October 14, 2017
10:36Author Spotlight: Optimization of Airflow Velocities in Battery Cooling Systems for Enhanced Thermal Performance and Reduced Energy Consumption
Published on: November 3, 2023
Related Concept Videos
Fast Decoupled and DC Powerflow
Control of Power Flow
Multimachine Stability
In analyzing the system, the nodal equations represent the relationship between bus voltages, machine voltages, and machine currents. The nodal equation is given by:
Batteries and Fuel Cells
Generator Voltage Control
The Power Flow Problem and Solution