Related Experiment Video
Updated: Jul 5, 2025

Disentangling High Strength Copolymer Aramid Fibers to Enable the Determination of Their Mechanical Properties
Published on: September 1, 2018
Physical, mechanical, and microstructural characterisation of tungsten carbide-based polymeric composites for
Nadin Jamal Abualroos1,2, Mohd Idzat Idris3, Haidi Ibrahim4
1Department of Biomedical Imaging, Advanced Medical and Dental Institute, SAINS@BERTAM, Universiti Sains Malaysia, 13200, Kepala Batas, Pulau Pinang, Malaysia.
Abstract:
Polymeric based composites have gained considerable attention as potential candidates for advanced radiation shielding applications due to their unique combination of high-density, radiation attenuation properties and improved mechanical strength. This study focuses on the comprehensive characterisation of polymeric based composites for radiation shielding applications. The objective of this study was to evaluate the physical, mechanical and microstructural properties of tungsten carbide-based epoxy resin and tungsten carbide cobalt-based epoxy resin for its efficiency in shielding against gamma-rays ranging from 0.6 up to 1.33 MeV. Polymeric composites with different weight percentages of epoxy resin (40 wt%, 35 wt%, 30 wt%, 25 wt%, 20 wt%, 15 wt% and 10 wt%) were fabricated, investigated and compared to conventional lead shield. The attenuation of the composites was performed using NaI (Tl) gamma-ray spectrometer to investigate the linear and mass attenuation coefficients, half value layer, and mean free path. High filler loadings into epoxy resin matrix (90% filler/10% epoxy) exhibited excellent gamma shielding properties. Mechanical properties, such as hardness were examined to assess the structural integrity and durability of the composites under various conditions. The fabricated composites showed a good resistance, the maximum hardness was attributed to composites with small thickness. The high loading of fillers in the epoxy matrix improved the microhardness of the composites. The distribution of the filler powder within the epoxy matrix was investigated using FESEM/EDX. The results revealed the successful incorporation of tungsten carbide and cobalt particles into the polymer matrix, leading to increased composite density and enhanced radiation attenuation. The unique combination of high-density, radiation attenuation, and improved mechanical properties positions polymeric based composites as promising candidates for radiation protection field.
More Related Videos
07:47Reverse Microemulsion-mediated Synthesis of Monometallic and Bimetallic Early Transition Metal Carbide and Nitride Nanoparticles
Published on: November 27, 2015
07:53Cutting Procedures, Tensile Testing, and Ageing of Flexible Unidirectional Composite Laminates
Published on: April 27, 2019