Related Experiment Video
Updated: Aug 2, 2026

Three-Dimensionally Printed Microfluidic Cross-flow System for Ultrafiltration/Nanofiltration Membrane Performance Testing
Published on: February 13, 2016
Mathematical modeling and digital design of an intensified filtration-washing-drying unit for pharmaceutical
Francesco Destro1, Inyoung Hur2, Vivian Wang3
1CAPE-Lab - Computer-Aided Process Engineering Laboratory, Department of Industrial Engineering, University of Padova, 35131 Padova PD, Italy.
Abstract:
This paper introduces a comprehensive mathematical model of a novel integrated filter-dryer carousel system, designed for continuously filtering, washing and drying a slurry stream into a crystals cake. The digital twin includes models for dead-end filtration, cake washing and convective cake drying, based on dynamic multi-component mass, energy and momentum balances. For set of feed conditions and control inputs, the model allows tracking the solvents and impurities content in the cake (critical quality attributes, CQAs) throughout the whole process. The model parameters were identified for the isolation of paracetamol from a multi-component slurry, containing a non-volatile impurity. The calibrated model was used for identifying the probabilistic design space and maximum throughput for the process, expressing the combinations of the carousel feed conditions and control inputs for which the probability of meeting the target CQAs is acceptable.
Related Concept Videos
Upstream Processing
Downstream Processing

