Bamboo-Inspired Porous Scaffolds for Advanced Orthopedic Implants: Design, Mechanical Properties, and Fluid...

In orthopedic implant development, incorporating a porous structure into implants can reduce the elastic modulus to prevent stress shielding but may compromise yield strength, risking prosthesis fracture. Bamboo's natural structure, with its exceptional strength-to-weight ratio, serves as inspiration. This study explores biomimicry using bamboo-inspired porous scaffolds (BISs) resembling cortical bone, assessing their mechanical properties and fluid characteristics. The BIS consists of two 2D units controlled by structural parameters α and β. The mechanical properties, failure mechanisms, energy absorption, and predictive performance are investigated. BIS exhibits mechanical properties equivalent to those of natural bone. Specifically, α at 4/3 and β at 2/3 yield superior mechanical properties, and the destruction mechanism occurs layer by layer. Besides, the Gibson-Ashby models with different parameters are established to predict mechanical properties. Fluid dynamics analysis reveals two high-flow channels in BISs, enhancing nutrient delivery through high-flow channels and promoting cell adhesion and proliferation in low-flow regions. For wall shear stress below 30 mPa (ideal for cell growth), α at 4/3 achieves the highest percentage (99.04%), and β at 2/3 achieves 98.46%. Permeability in all structural parameters surpasses that of human bone. Enhanced performance of orthopedic implants through a bionic approach that enables the creation of pore structures suitable for implants.