Related Experiment Video
Updated: Jun 8, 2026

Fabrication and Design of Wood-Based High-Performance Composites
Published on: November 9, 2019
Critical Review on the Use of Extractives of Naturally Durable Woods as Natural Wood Protectants
Grant T Kirker1, Babar Hassan2, Mark E Mankowski3
1Durability and Wood Protection, USDA-FS Forest Products Laboratory, Madison, WI 53726, USA.
Abstract:
Naturally durable wood pre-dates preservative-treated wood and has been demonstrated to offer a suitable service life for certain applications where preservative-treated wood is not feasible. Heartwood extractives have been demonstrated to impart bio-deteriorative resistance to naturally durable wood species. These extractives are typically found in the heartwood of living trees and are produced either by the death of parenchyma cells or as the result of external stimuli. The mechanisms of natural durability are not well understood, as heartwood extractives can be extremely variable in their distribution, composition, and efficacy in both living and harvested trees. The underlying complexity of heartwood extractives has hindered their standardization in residential building codes for use as wood preservatives. The use of naturally durable lumber is not always feasible, as woods with exceptionally durable heartwood do not typically yield lumber with acceptable machining properties. A potential approach to overcome the inherent difficulty in establishing guidelines for the appropriate use of naturally durable wood is to focus solely on the extractives as a source of bioactive protectants based on the strategies used on living and dead wood to repel the agents of biodeterioration. This critical review summarizes the relevant literature on naturally durable woods, their extractives, and their potential use as bio-inspired wood protectants. An additional discussion will be aimed at underscoring the past difficulties in adopting this approach and how to overcome the future hurdles.
Related Concept Videos
Introduction to Wood
The structural integrity of the wood...
Softwoods and Hardwoods
Seasoning of Wood
Achieving equilibrium moisture content is the goal of seasoning; this is the point where the wood's moisture content stabilizes to align with the moisture levels of the surrounding environment. Proper...
Wood Surfacing
The equipment used in the surfacing process is a plane equipped with rotating blades. This tool efficiently smoothens the wood surface and can...
Lumber Defects
Shakes are minor fractures that run along or across the wood's annual rings, while wane is...
Wood Products
Glue-laminated wood, often referred to as glulam, combines multiple smaller pieces of dimensional lumber using adhesives to form a single, larger piece. Cross-laminated timber consists...

