Necking Reduction at Low Temperature in Aspect Ratio Etching of SiO₂ at CF₄/H₂/Ar Plasma

This study investigated the effect of temperature on the aspect-ratio etching of SiO₂ in CF₄/H₂/Ar plasma using patterned samples of a 200 nm trench in a low-temperature reactive-ion etching system. Lower temperatures resulted in higher etch rates and aspect ratios for SiO₂. However, the plasma property was constant with the chuck temperature, indicated by the line intensity ratio from optical emission spectroscopy monitoring of the plasma. The variables obtained from the characterization of the etched profile for the 200 nm trench after etching were analyzed as a function of temperature. A reduction in the necking ratio affected the etch rate and aspect ratio of SiO₂. The etching mechanism of the aspect ratio etching of SiO₂ was discussed based on the results of the surface composition at necking via energy-dispersive X-ray spectroscopy with temperature. The results suggested that the neutral species reaching the etch front of SiO₂ had a low sticking coefficient. The bowing ratio decreased with lowering temperature, indicating the presence of directional ions during etching. Therefore, a lower temperature for the aspect ratio etching of SiO₂ could achieve a faster etch rate and a higher aspect ratio of SiO₂ via the reduction of necking than higher temperatures.