Related Experiment Video
Updated: Jul 5, 2025

A Detailed Protocol for Perspiration Monitoring Using a Novel, Small, Wireless Device
Published on: November 24, 2016
Self-Adaptive Rapid Thermal Conductive Fabrics Based on Hygroscopic Shrinkage Response for Personal Cooling and
Hongkun Liu1, Yanan Xiao1, Yang Shen1
1Key Laboratory of Automobile Materials of Ministry of Education, School of Materials Science and Engineering, Jilin University, Changchun 130022, China.
Abstract:
Advanced fabrics with thermal wet management capability as low energy consumption media contribute to personal cooling and drying. Nevertheless, it remains a great challenge to obtain intelligent fabrics with adjustable thermal conductivity (TC) capable of bridging the supply and demand between human body temperature and self-adaptive thermal conduction. Herein, we report hygroscopic-shrinkage nanofiber-based fabrics with excellent moisture sensitivity and significant volume shrinkage, which benefits the construction of high-density thermal conductive pathways by absorbing sweat, with a maximum sweat absorption rate reaching up to 1781%. The TC of the shrunken fabric is significantly increased from the initial 0.102 to 0.731 W·m-1 K-1 with a volume shrinkage rate of 89% due to the synergistic effect of van der Waals force, capillary force, viscous resistance, and gravity. Besides, an enhanced TC of the resulting fabrics facilitates rapid heat transfer to the environments. By capturing the surface temperature variations of the fabric after shrinkage and commercially available cotton/Coolmax, we obtained the fabric that releases the same amount of heat in a shorter period of time (3.3 s). With its exceptional personal thermal and wet management properties, this study paves the way for designing new-generation intelligent fabrics capable of creating more comfortable microclimates.
More Related Videos
08:50Fabrication and Characterization of a Conformal Skin-like Electronic System for Quantitative, Cutaneous Wound Management
Published on: September 2, 2015
06:28Fabric Moisture Uniform Control to Study the Influence of Air Impingement Parameters on Fabric Drying Characteristics
Published on: August 19, 2019
Related Concept Videos
Mechanism of heat transfer
Body Temperature
Mechanisms of Heat Transfer
Conduction, accounting for approximately 3% of body heat loss at rest, is the process of exchanging heat between molecules of two materials in direct contact. This can result in both heat loss and gain. For instance, when the body is submerged in water, which conducts heat 20 times more effectively than air, it can either lose or gain significant...
Drying Shrinkage
A portion of this drying shrinkage can be reversed; if the concrete is...
Thermoregulation
Hot Weather Concreting
Mitigating the heat increase in concrete can be economically achieved by shading aggregate stockpiles to prevent heating from solar radiation,...