Related Experiment Video
Updated: Jul 5, 2025

Experimental System of Solar Adsorption Refrigeration with Concentrated Collector
Published on: October 18, 2017
A MATLAB simulation-based analytical study of energy, exergy, and cost benefits in jet-impinged protrusion-roughened
Mohammad Salman1, Jie Liu1, Ranchan Chauhan2
1School of Mechanical Engineering, Yeungnam University, 280 Daehak-Ro, Gyeongsan-Si, 712-749, Gyeongbuk, Korea.
Abstract:
This study analyzes the performance and cost-effectiveness of a protrusion-roughened jet-impinged double-pass solar air collector (PRJDPSAC) within a Reynolds number (Re) range of 2500 to 22,500. Examining jet slot parameters, i.e., the jet height ratio (Hjp/Dhd = 0.11-0.44), stream-wise pitch ratio (Xjp/Dhd = 0.44-1.32), and span-wise pitch ratio (Yjp/Dhd = 0.44-1.32), the model demonstrates enhanced energy conversion, minimizes losses, improves efficiency, and brings positive economic impact, making it a promising solution for diverse applications including drying processes, livestock facilities, remote accommodations, and HVAC system pre-heating. The examination incorporates advanced MATLAB simulations to assess energy-exergy performance and cost viability. At lower Re values, both energy ( ) and exergy ( ) efficiencies increase uniformly; however, stabilization and decline occur at higher Re values. The maximum for the PRJDPSAC is 4.38% under a temperature rise parameter of 60 × 10-3 Km2/W for obtaining optimum values of Xjp/Dhd = 1.32, Hjp/Dhd = 0.22, and Yjp/Dhd = 1.32, which is 31% higher than that of the smooth double-pass solar air collector (DPSAC). Economic benefits are significant for PRJDPSAC within mair (0.01-0.07 kg/s), but above 0.07 kg/s, the DPSAC becomes more cost-effective. Integrating simulation and experimental data, the study highlights MATLAB's effectiveness for solar energy system analysis and optimization, reinforcing the practicality of the proposed collector design.
More Related Videos
09:00Indoor Experimental Assessment of the Efficiency and Irradiance Spot of the Achromatic Doublet on Glass ADG Fresnel Lens for Concentrating Photovoltaics
Published on: October 27, 2017
14:01Making Record-efficiency SnS Solar Cells by Thermal Evaporation and Atomic Layer Deposition
Published on: May 22, 2015
Related Concept Videos
Energy Conservation and Bernoulli's Equation
All the terms in the equation have the dimension of energy per unit volume. The kinetic energy per unit volume is called the kinetic energy density, and the potential energy per unit volume is...
Mechanisms of Heat Transfer II
Mechanisms of Heat Transfer I
Mechanisms of Heat Transfer
Conduction, accounting for approximately 3% of body heat loss at rest, is the process of exchanging heat between molecules of two materials in direct contact. This can result in both heat loss and gain. For instance, when the body is submerged in water, which conducts heat 20 times more effectively than air, it can either lose or gain significant...
Energy Considerations in Open Channel Flow
Mechanism of heat transfer