Characterizing NOx emissions from diesel trucks with tampered aftertreatment systems and its implications for...

Reducing the differences between real-world and certificated NOx emission levels is an important element of in-use emission surveillance programs. Therefore, investigating the characteristics of the vehicles which have much higher NOx emissions (i.e., high-emitters) and determining a reasonable cut-off point to identify high-emitters with a low false detection rate is important. In this study, six diesel trucks were tested under different aftertreatment conditions. The results showed that the discrepancies of fuel-specific NOx emissions between vehicles with functioning and tampered selective catalytic reduction (SCR) systems occur mainly from medium- to high-speed modes. This is because the SCR systems were at low conversion efficiencies when the exhaust temperature was low, including cold-start and urban creep conditions. By using binary classification, we selected fuel-specific NOx cut-off points for high-emitters from China V and China VI diesel trucks. The false detection rate of high-emitters can decrease by 33 % and 95 %, if only NOx emissions from medium- to high-speed modes were used for the chosen cut-off points, respectively. This work highlights the importance of in-use emission compliance programs. It also suggests that high-emitters can be more accurately identified at medium- to high-speed modes if using instantaneous emission data.