In-situ self-crosslinking strategy for super-tough polylactic acid/ bio-based polyurethane blends

As a bio-based degradable plastic, polylactic acid (PLA) is highly commercialized, but its inherent brittleness limits its widespread use. In-situ polymerization techniques are effective in improving the toughness of PLA. However, the enhancement of the toughening effect in polyurethanes (PUs) through in-situ self-crosslinking still requires improvement and heavily relies on petroleum-derived feedstocks in certain approaches. In this paper, 1,3-polypropanediol (PO3G) of bio-based origin rather than conventional polyols like polyethylene glycol (PEG) and poly propylene glycol (PPG) was used. PLA/PO3G-PU blends were prepared via an in-situ self-crosslinking strategy. With a notch impact and tensile strength of 55.95 kJ/m² and 47.77 MPa (a retention rate of 68.9 % compared with pure PLA), respectively, PLA/PO3G-PU blends achieved a better balance between stiffness and toughness. This work provides a new option for PLA to achieve a stiffness-toughness balance and get rid of dependence on petrochemical resources.