Related Experiment Video
Updated: Jul 4, 2025

Artificial Thermal Ageing of Polyester Reinforced and Polyvinyl Chloride Coated Technical Fabric
Published on: January 29, 2020
A P/N flame retardant for polyester-cotton fabrics: Flame retardancy, mechanical properties and antibacterial
Li-Yao Zhang1, Wan-Meng Song1, Ping Li1
1College of Textiles & Clothing, Institute of Functional Textiles and Advanced Materials, National Engineering Research Center for Advanced Fire-Safety Materials D & A (Shandong), State Key Laboratory of Bio-Fibers and Eco-textiles, Qingdao Key Laboratory of Flame-Retardant Textile Materials, Qingdao University, Qingdao 266071, China.
Abstract:
A phosphorus‑nitrogen synergistic flame retardant (named POI) was obtained by the chemical reaction between phenylphosphonic acid (PPOA) and polyethyleneimine (PEI), and used to give the flame retardancy of PTCO. The effects of PPOA and POI on various properties of PTCO were investigated. PPOA obviously improved the flame retardancy of PTCO/PPOA, while the breaking force of PTCO/PPOA was greatly reduced. However, the introduction of PEI made the surface of fabrics smoother. PTCO/POI had better flame retardancy than PTCO/PPOA did, and the limiting oxygen index value of PTCO/POI reached to 29.8 %. POI had a good effect on reducing the Rmax of both cotton and polyester components. The phosphoric acid groups in POI can promote the dehydration and carbonization reactions of PTCO, which protects the inner fabrics, and POI can release incombustible gases such as NH3 and N2 during burning, which can dilute the oxygen concentration. The flame-retardant mechanism of PTCO/POI was mainly the condensed phase. At the same time, there were no changes in whiteness and mechanical properties compared with those of PTCO, and it also had antibacterial property. This work provides a simple and effective method to prepare flame-retardant and antibacterial PTCO.
Related Concept Videos
Types of Step-Growth Polymers: Polyesters
Polyesters are commonly prepared from terephthalic acid and ethylene glycol; the crude product is known as poly(ethylene terephthalate) or PET. However, polyesters are synthesized industrially by transesterification of dimethyl terephthalate with ethylene glycol at 150 °C. The two reactants and the...
Variables Affecting Phosphorescence and Fluorescence
Flame Photometry: Overview
Polymer Classification: Architecture
Gas Chromatography: Types of Detectors-II
Photoluminescence: Applications

