Preparation of reed fibers reinforced graft-modified starch-based adhesives based on quantum mechanical simulation...

Starch is a biomass polymer material with a high yield and comprehensive source. It is used as a raw material for preparing adhesives because of its highly active hydroxyl group. However, poor adhesion and water resistance hinder the application of starch-based adhesives (SBAs). Based on this, the starch was modified through graft copolymerization with itaconic acid as a cross-linking agent, methyl methacrylate and methyl acrylate as copolymers. Additionally, reed fibers were synergistically modified with polydopamine deposition to prepare an environmentally friendly SBA used in plywood production. Fourier transform infrared spectroscopy (FT-IR), nuclear magnetic resonance spectroscopy (¹H NMR), X-ray diffraction (XRD), and thermogravimetric analysis (TG) demonstrate that copolymerization of methyl methacrylate and methyl acrylate with starch improves the shear strength, water resistance, and thermal stability of the SBA. Compared to unmodified starch, the modified SBA exhibits a 129 % increase in dry strength and achieves a wet strength of 1.36 MPa. Fukui function, Frontier orbit theory, and molecular dynamics simulation have shown that itaconic acid promotes the copolymerization of starch and acrylate monomers. The modified starch has fewer hydrogen bonds, less order, and a denser macromolecular network structure, which provides a reference for studying the molecular interaction mechanisms of SBAs.