Improving the quality properties of soybean oil by using rice bran oil

This study aims to study the effect of substituting soybean oil (SO) with rice bran oil (RBO) at different levels (25%, 50%, and 75%) on the physical and chemical properties, fatty acid composition, and oxidative stability of SO, also, study the effect of storing SO, RBO, and their blend oils at ambient temperature for a period of 12 months on the content of free fatty acids (% FFA), peroxide value (PV), and thiobarbituric acid (TBA). RBO demonstrated good quality, as evidenced by its initial low values of % FFA, PV, and TBA. Furthermore, RBO was found to be an excellent source of γ-oryzanol, whereas the other oils lacked this compound. Consequently, increasing the proportion of RBO in SO resulted in the least degradation, while pure SO exhibited the highest degree of degradation. Moreover, the blend oils demonstrated an inhibitory effect against oxidation, allowing for a prolonged storage period without the use of industrial antioxidants. Throughout the entire storage period, the % FFA and PV of all tested blend oil samples remained within the limits recommended for human consumption. TBA exhibited a similar trend to PV. However, an incremental increase in TBA values was observed as the storage period of the oils extended. In SO, TBA levels increased from 0.533 mg malonaldehyde/kg oil at the beginning to 1.446 mg malonaldehyde/kg oil after 12 months of storage. In RBO, TBA levels increased from 0.336 mg malonaldehyde/kg oil at the beginning to 0.882 mg malonaldehyde/kg oil after 12 months of storage.