Enhancement of fouling resistance of microfiltration membranes by surface modification using UV-curing photopolymer

Membrane fouling, a major problem in membrane-based processes, decreases the water permeability of a membrane. Membrane fouling can be mitigated either by the application of an additional process for membrane cleaning and pretreatment or by fabricating and modifying membranes to achieve low surface interaction forces. This study aimed to improve the fouling resistance of a commercially available membrane by modifying it with a UV-cured photopolymer, MINs, to achieve low surface energy. The morphological variations (thickness and pore size distribution) of the coating layer were most affected by the viscosity of the UV-cured photopolymer. The thickness of the coating layer was inversely proportional to the dilution factor of the MINs. The pore size distribution could be adjusted by surface modification, and the smallest pore size range (0.077-0.078 μm) was observed for the MC5 membrane. In addition, the pore size distribution, surface roughness, and zeta potential of the membrane decreased after the surface modification. Thus, the developed surface modification strategy has potential for improving the fouling resistance of commercially available microfiltration membranes.