The Minimum Admissible Detuning Efficiency of MRI Receive-Only Surface Coils

The minimum admissible detuning efficiency (DE) of a receive coil is an essential parameter for coil designers. A receive coil with inefficient detuning leads to inhomogeneous B₁ during excitation. Previously proposed criteria for quantifying the DE rely on indirect measurements and are difficult to implement.

To present an alternative method to quantify the DE of receive-only surface coils.

Theoretical study supported by simulations and phantom experiments.

Uniform spherical (100 mm diameter) and cylindrical (66 mm diameter) phantoms.

Dual repetition time B₁ mapping sequence at 1.5T, and Bloch-Siegert shift B₁ mapping sequence at 3.0T.

One non-planar (80 × 43 mm²) and two planar (40 and 57 mm diameter) surface coils were built. Theoretical analysis was performed to determine the minimum DE required to avoid B₁ distortions. Experimental B₁ maps were acquired for the non-planar and planar surface coils at both 1.5T and 3.0T and visually compared with simulated B₁ maps to assess the validity of the theoretical analysis.

None.

Based on the theoretical analysis, the proposed minimum admissible DE, defined as DE_thr = 20 Log (Q) + 13 dB, depended only on the quality factor (Q) of the coil and was independent of coil area and field strength. Simulations and phantom experiments showed that when the DE was higher than this minimum threshold level, the B₁ field generated by the transmission coil was not modified by the receive coil.

The proposed criterion for assessing the DE is simple to measure, and does not depend on the area of the coil or on the magnetic field strength, up to 3T. Experimental and simulated B₁ maps confirmed that detuning efficiencies above the theoretically derived minimal admissible DE resulted in a non-distorted B₁ field.

2 TECHNICAL EFFICACY: Stage 1.